Custom Flow Resistor Kit

The Custom Flow Resistor Kit is designed for use with the Pressure-based Droplet Starter Kit. With the tools provided, flow resistors of the required length can be made. This enables the user to set the desired flow rate ratio between the organic phase and the aqueous phase without independent pressure control of each phase. The additional benefit of flow resistors is that they maximize the flow rate range of the Mitos P-Pump and prevent flow rate instability when using fluids of different viscosities. The kit also contains high tolerance FEP tubing with 100 µm microbore and the required fittings to connect into the droplet system.

The Custom Flow Resistor Kit 0.8 mm is the ideal solution when 0.8 mm OD flow resistors are required for use with the Mitos P-Pump. With the tools provided, flow resistors of the required length can be made to bring selected fluids into the correct flow rate range. The additional benefit of flow resistors is that they maximize the flow rate range of the Mitos P-Pump and prevent flow rate instability when using fluids of different viscosities.

Part number 3200049Part number 3200309
Od
Quantity
Unit Price
$740.00
$1,040.00
  • Overview
FEATURES & BENEFITS
Generic

Features and benefits:

  • Allows user to set the flow rate ratio without independent pressure control
  • Maximises the flow rate range of the Mitos P-Pump
  • Enables low flow rate performance for systems of low fluidic resistance
  • Prevents flow rate instability when using fluids of different viscosities
  • Quick to make and connect
  • Excellent chemical compatibility
1/16"

The kit contains:

  • 1 x FEP tubing 100 µm ID, 1/16" OD, 10 m length
  • 5 x Delrin 1/4 - 28" end fitting with ETFE ferule for 1/16" tubing
  • 1 x Delrin 1/4 - 28" female - female union
  • 1 x PTFE Pipe Cutter for clean 90° cuts on FEP tubing
0.8mm

The kit contains:

  • 1 x FEP tubing 100 µm ID, 0.8 mm (1/32") OD, 10 m length
  • 5 x Delrin 1/4-28" end fitting with ETFE ferule for 0.8 mm (1/32") OD tubing
  • 1 x Delrin 1/4-28" female - female union
  • 1 x precision pipe cutter for clean 90 ° cuts on FEP tubing
  • The kit contains high tolerance FEP tubing with 100 µm microbore and the required fittings to connect into the droplet system.