Dropix Droplets on Demand

Showing all 8 results

  • + Dropix Sample Strip / Lids

    Dropix Sample Strip / Lids

  • x

    Dropix Sample Strip / Lids

    Each Mitos Dropix (Part No. 3200350) requires one Dropix Sample Strip containing up to 24 reagents for droplet formation. Made of COC for high visibility, the strips can be used in a 192 well plate configuration within the Dropix Sample Strip Holder (Part No. 3200356) for filling the sample outside of the carrier vessel prior to using Mitos Dropix.

    View Details

  • + Mitos Dropix

    Mitos Dropix

  • x

    Mitos Dropix

    The Mitos Dropix is a compact device for sampling and droplet sequence production. It enables users to create an array of precise volume droplets from up to 24 unique sources. Benefiting from a very precise electro-mechanical design, Mitos Dropix is controlled by computer. The Dropix software (provided) allows users to fully control droplets' size and frequency, as well as run autonomous sequences with small amounts of set-up time.

    View Details

  • + Dropix Fluid Reservoir – PEEK

    Dropix Fluid Reservoir – PEEK

  • x

    Dropix Fluid Reservoir – PEEK

    The Dropix Fluid Reservoir - PEEK provides constant carrier fluid (typically FC40 oil) to the Mitos Dropix. With a maximum fill volume of 25 ml, this fluid reservoir made of PEEK comes with a lid to prevent contamination and evaporation loss between uses. The Mitos Sample Hook - 0.8 mm (Part No. 3200353) passes through the fluid in the reservoir between aspirations, whilst taking the tube in and out of the sample wells, providing a constant flow. Please note, that although PEEK is very chemically resistant, it is opaque so visualization of wells if filling directly into the strip will be not possible.

    View Details

  • + Dropix Fluid Reservoir – PMMA

    Dropix Fluid Reservoir – PMMA

  • x

    Dropix Fluid Reservoir – PMMA

    The Dropix Fluid Reservoir - PMMA provides constant carrier fluid (typically FC40 oil) to the Mitos Dropix and allows maximum visibility of  droplet formation. With a maximum fill volume of 25 ml, this fluid reservoir comes with a PEEK lid to prevent contamination and evaporation loss between uses. The Dropix Sample Hook - 0.8 mm (Part No. 3200353) passes through the fluid in the reservoir between aspirations, whilst taking the tube in and out of the sample wells, providing a constant flow.

    View Details

  • + Dropix Sample Hook Fitting – 0.8 mm

    Dropix Sample Hook Fitting – 0.8 mm

  • x

    Dropix Sample Hook Fitting – 0.8 mm

    The Dropix Sample Hook Fitting - 0.8 mm (Part No. 3200355) is a small threaded fitting which screws into the top of the Dropix Sample Hook - 0.8 mm (Part No. 3200353) to clamp the tubing to the Droplet Storage Coil - 0.25 mm (Part No. 3200349). Highly chemically resistant and made from stainless steel and PEEK, it works by clamping down onto an O-ring which holds the tubing in place inside the hook.

    View Details

  • + Dropix Sample Strip Holder

    Dropix Sample Strip Holder

  • x

    Dropix Sample Strip Holder

    Dropix Sample Strip Holder provides a base to hold up to 8 Dropix Sample Strips (Part No. 3200351) (each Dropix Sample Strip contains 24 wells) forming a SBS 192 well plate. This formation facilitates integration with existing handling systems and is useful for the filling of the sample strips outside of the carrier vessel prior to using Mitos Dropix. Very chemically resistant, it can also be used for holding and storing the sample strips after usage, without leakage.

    View Details

  • + Dropix Sample Hook – 0.8mm

    Dropix Sample Hook – 0.8mm

  • x

    Dropix Sample Hook – 0.8mm

    The Dropix Sample Hook - 0.8mm guides the tubing down and around the Dropix Sample Strip (Part No. 3200351) so the tubing is directed upwards and underneath the wells. Made of stainless steel and chemically resistant, the Dropix Sample Hook - 0.8mm holds the tube securely during operation with a fixed bend radius. The Dropix Sample Hook - 0.8mm works together with the Dropix Sample Hook Fitting - 0.8mm (Part No. 3200355).

    View Details

  • + Droplet Storage Coil – 0.25mm (pack of 3)

    Droplet Storage Coil – 0.25mm (pack of 3)

  • x

    Droplet Storage Coil – 0.25mm (pack of 3)

    The Droplet Storage Coil - 0.25mm (Part No. 3200349) comes in a pack of three portable holders containing 1 meter of natural FEP tube (0.8mmOD, 0.25mmID) pre-coiled within. Made of PMMA acrylic, this holder is placed on the top of the Mitos Dropix, facilitating the droplets to flow up the tube and allowing easy visualization. Additionally, these coils provide the ability to seal off the tube so that they can be removed as a sealed storage unit and be used for further experimentation.

    View Details