Small Droplet System

The Small Droplet System is ideal for producing and analysing microemulsions that offer increased stability, a higher interfacial area and the capacity to solubilize both aqueous and oil-soluble compounds.

The system features Dolomite's innovative Small Droplet Chips, currently the smallest commercial droplet-making chips available, which allow the generation of highly monodispersed micro-droplets from 5µm to 30µm in diameter.

Microfluidic pumps and accessories

	Login for price Add:	Mitos Flow Rate Sensor (0.4-7µl/min) Designed for use with the Mitos Sensor Display (Part No. 3200095), the Mitos Flow Rate Sensors enable fast and accurate measurements of ultra low liquid rates. The high precision thermal sensor...
	Login for price Add:	Mitos P-Pump The Mitos P-Pump provides pulseless liquid flow with a precise pressure driven pumping mechanism. It operates over a wide pressure range (0-10bar) with excellent response time and accuracy....
	Login for price Add:	Mitos Sensor Display The Mitos Sensor Display can be used interchangeably with the Mitos Pressure Sensor (Part No. 3200119) and Mitos Flow Rate Sensors (Part Nos. 3200096-3200100) which simply attach with a...

Microfluidic chips and connectors

	Login for price Add:	Linear Connector 4-way The Linear Connector 4-way allows fast, reliable and efficient connection between Dolomite chips and 1.6mm O.D. tubing. The Linear Connector works with chips that are 4mm thick, 15mm wide and...
	Login for price Add:	Small Droplet Chip (14µm etch depth) The Small Droplet Chip is a glass microfluidic device designed for generating small droplets in the size range of 5-30µm. The Small Droplet Chip offers a flow focussing junction geometry...
	Login for price Add:	Small Droplet Chip (14µm etch depth), hydrophobic The Small Droplet Chip is a glass microfluidic device designed for generating small droplets in the size range of 5-30µm. The Small Droplet Chip offers a flow focussing junction geometry...
	Login for price Add:	Top Interface 4-way (4mm) The Top Interface 4-way (4mm) works in conjunction with the Linear Connector 4-way (Part No. 3000024), providing fluidic connections to the top surface of glass microfluidic chips. The Top...

Click here to see Dolomite's full range of Droplet Junction Chips

Other components

	Login for price Add:	Advanced Droplet Starter Kit This starter kit contains all the required tubing, fittings and accessories for generating droplets with the Droplet Advanced System. The starter kit contains: 1 x T-Connector ETFE4 x Fluid Pipe...
	Login for price Add:	Flow Resistor Kit Designed for the Mitos P-Pump (Part No. 3200016) the Flow Resistor Kit can be used to insert additional flow resistance into a system. The flow resistors enable very low flow rates to be...
	Login for price Add:	Pneumatic Connector Kit The Pneumatic Connector Kit contains a selection of fittings and tubing to enable connection of your compressed air or gas supply to the Mitos P-Pump (Part No. 3200016). Features and benefits:...
	Login for price Add:	T- Connector ETFE T- Connector ETFE 0.5mm I.D. for 1.6mm O.D. Pipe. For more information, please see the datasheet.
	Login for price Add:	Tubing Starter Pack The Tubing Starter Pack contains a selection of fittings including ferrules, PTFE tubing and head fittings to enable fluidic connections to be made between Dolomite pumps and a microfluidic...